Upon first hearing that the Nexus 4 would be constructed of front and rear glass panels, I immediately thought of all the issues that have plagued the iPhone - easily cracked screens, scratched glass and a slippery surface leaving little to hold on to. Don't get me wrong, the design makes the Nexus 4 look absolutely stunning, but it makes it a much more delicate phone than it should be.
That said, I contacted Spigen right away to get my hands on their Ultra Crystal Dual screenshield, which contains a set of front / rear screen protectors. Due to their ultra-thin and clear nature, you cannot tell they are installed as they function identically to the glass panels. You'll still find build ups of grease and fingerprints - but at least you will be protected from scratches.
Retailing for $13.99, there are certainly cheaper alternatives out there, but I choose to use Spigen's as I believe they provide the most 'natural' experience, since they don't distort the display. Check out the full video review below for more info;
I was lucky enough to get my hands on one of these very cool pieces of kit over the last couple of days, check out the video for a detailed demonstration of what it can do. I have to return it to Samsung very quickly, so if you have questions please ask them at the YouTube channel as quickly as possible.
Sometimes a manufacturer's design decisions lead to difficulty producing certain 3rd party accessories, which can be frustrating to consumers. Examples of this are seen with the HTC One X and its non-removable battery (which makes it very difficult to increase battery life), the Samsung Galaxy Nexus (which featured slightly curved display, causing screenshields to bubble on the edges) and now the Samsung Galaxy S3, that has bevelled edges, once again causing most screenshields to bubble.
Up until a couple of weeks ago, I had been using screenshields that were cut short and only covered the touchscreen portion of the display - a bit annoying but something I learned to live with. That all changed when I was introduced to the Tridea True Shield, a full coverage 3D screen protector. Whatever the technology used may be, it works - pretty well for the most part!
The True Shield is a crystal clear protector that offers good clarity, protection and a nearly invisible design - although it is quite the fingerprint magnet, showing these off very well. I shouldn't use the term full coverage however, as there is still a slight gap between the edges and the protector, but this is almost negligible and most cases will cover this gap up.
At 12$, it is priced higher than other options, especially since you only receive 1 in the package. I've got the SGP Curved Crystal in for review, which is a direct competitor to the True Shield, so if you're interested in these types of protectors - stay tuned for that review before making your decision.
I test out a lot of cases. I get 2 or 3 packages weekly (sometimes more!) from different case manufacturers trying to promote a new product. For the most part, the majority of cases are very similar to another and don't 'think outside the box'. Whenever I find a case that does, I'm eager to try it out. Now, a lot of people don't care for a unique or exclusive case, they simply want something protective and reliable. I completely understand that, but as a reviewer, I see so much of the same stuff that I like something out of the ordinary occasionally.
The Speck FabShell does a good job at fitting into that space with its unique fabric backing. The case itself is pretty straightforward, featuring a TPU body that is backed with plastic for added durability and protection. What sets this case apart from others is the fact that the plastic is lined in fabric, which not only adds grip, but features a characteristic design.
I'm not a huge fan of the design options that Speck has released, but the case itself is not a let down. Offering great protection, the FabShell features nearly perfect ports and cutouts, falling short due to its lack of responsiveness with the power button. Other than that however, it is well made.
Check out the video review below for more information and my full thoughts:
There are some cases that just tend to be reliable, affordable & get the job done. The Diztronic Matte Black TPU case is exactly that for me, I don't always use it, but I always keep it around. Priced at $9.90 USD, this is a budget-conscious option, but don't let that price point fool you - this case is as good or even better than other more expensive alternatives.
Featuring a matte coating on the back, the Diztronic case is a TPU case that hugs your Galaxy S3 tightly for a snug fit. Ports and cutouts are decently cut, with some being slightly misaligned (but not affecting overall performance). Protection wise, you'll find this case provides excellent scratch protection and some minimal drop & shock protection. Not too shabby for a 10$ case.
Bumper. What exactly does it mean? A quick dictionary search will lead you to something along these lines; a fixed metal bar used in a vehicle to reduce damage after a collision. Seems useful, huh? The folks at Tridea took the idea of a bumper and ported it to phones in order to have a similar effect, reducing damage during a drop or fall.
The result is the Tedoori Bumper case, made from a TPU material, it hugs the sides and corners of the Galaxy S III to provide a tight fit whilst adding a slight grip. The execution of the case is good for the most part, it is comfortable to hold while maintaing a minimalistic and simple design. The ports and cutouts are spot-on, so I have no problems with the manufacturing of the case.
The main issues come with the way the case is meant to be used, simply put: this case offers an extremely low amount of protection from scratches or drops. Bumper cases in general are to be used by consumers that are careful with their devices, the Tedoori being no exception. One drop and you can kiss your Galaxy S III goodbye. This isn't a knock on Tridea, but rather bumper cases in general.
The Galaxy S3 is finally amongst us! After a long 4 month wait (for me at least), I received my 16 GB Pebble Blue model late last week. Whenever I get my hands on a new device, I immediately start sourcing cases & accessories to keep my beloved well protected. In today's post, we'll be checking out the Spigen SGP Flex HD full coverage screen protector for the S3.
Back in December I installed and reviewed the same screen protector for the Galaxy Nexus and went on the use that screen protector for the following 7 months. Upon hearing SGP would remake this shield for the S3, I knew I wanted to check it out right away! A full coverage screenshield is one that covers the whole glass display, in the case of the S3, its slight curvature means some protectors can't cover the curved areas.
Visually, this screen protector won't provide the best clarity or feel, but where it excels is protection. A little thicker than most, the Flex HD provides unparalleled protection from drops and scratches.
Check out the video below for the installation (very easy!) and review:
In the continuation of our HTC One X accessory coverage, I've decided to take a look at the CandyShell case, which comes from the folks over at Speck Products. The CandyShell case first came to existence in early 2009, when it was produced for the iPhone 3GS. Its popularity was quickly noted by consumers and the case design spread to many other devices.
Due to its simplistic yet stylish approach and design, this remains Speck's most popular case, so it is no big surprise it was ported to the One X. The case itself is a hybrid, composed of a plastic shell with a silicone inner layer, although the real treat is that the materials are molded into one single piece. Due to its design, it is extremely protective, yet slimmer than most other hybrid cases.
Check out the full video review below for more info:
Seems a lot of you liked the Galaxy Nexus accessory coverage I brought to the site, with that said, the Galaxy Nexus is slowly becoming a last generation device. In my transition away from the Galaxy Nexus, I've gotten my hands on the HTC One X - which will be used in the next couple of weeks until my Galaxy S III arrives.
In order to protect the new investment, the folks at Case-Mate hooked me up with one of their new Tough cases. Like the name states, this is an ultra protective case featuring a dual hybrid layer design. The inner silicone is nothing special, average quality at best. However, once paired up with the hard plastic shell, the phone feels extremely solid and resistant. This case offers a great amount of protection, albeit at a premium price point.
Check out the full video review below for more info:
A phone is a device which contains part of your personal, social and work related information. Many of us see our phones as an extension of ourselves, unfortunately customizing your device is very limited, as cases follow strict patterns and designs. With Case-Mate's new DIY Custom cases, you're able to upload an image to their site and create your own customized case, exactly the way you want it done.
In the video below I've illustrated the process of designing your case and ordering it, then showing off the final result. Check it out and let us know what you think of it:
Good day, friends. This article kicks off a little series I’ve been planning for a while – the discussion and brief review of a few audio accessories I use. While not technically Android-specific, I do use these with my assorted Android devices, and thus considered it worthwhile to blither on about them a bit. Thanks in no small part to Supercurio’s amazing Voodoo Sound drivers for a lucky few phones and tablets, Android users are becoming increasingly concerned about audio quality, especially when playing music. The Wolfson audio chips in the original Galaxy S line set the bar for Android, and Voodoo sound took them to another level – they set the bar for mobile phones in general, over and above anything else on the market, iPhones included. With more interest in audio comes more scope for content like this, so here we are now.
I intend to cover three pieces of my own equipment –the little Ultimate Ears SuperFi 5 In-Ear Monitors (Or ‘earphones’, if you’re so inclined. This model has since been rebadged as the Ultimate Ears 600), the large Grado SR-60i headphones, and my wee FiiO E5 headphone amplifier. These represent on-the-go listening, home listening, and an optional add-on, respectively. To cap things off, fellow editor Neets has been kind enough to lend me her Koss PortaPros, which are somewhere inbetween the Ultimate Ears and the Grados in terms of size and portability.
We’ll start with some background on the industry and my experiences with portable audio in this instalment, and then ease into the actual review components. Read on after the jump, good people.
Battery life. The final frontier of convergence. The great challenge facing all smartphone owners... ...or at least those who actually use their convergence device for more than simple telephony (if you caught a faint whiff of a derisive sneer with that comment, it's because I meant it).
I can virtually guarantee that if you're here reading this you have at some point complained about your present phones battery life, and probably every smartphone you've owned before it too for that matter. I can also be almost certain that you've invested a fair amount of time investigating and experimenting with ways to extend it. Be that dimming the screen, scrupulously avoiding light coloured wallpapers, meticulously micro-managing your sync activities and data usage, flashing custom ROMs, or just plain curtailing your use. One thing nearly of all these things have in common is that you're compromising your use and enjoyment of the device.
You might think to yourself, "Wouldn't it be wonderful if there was a way I could have the battery life I need, but without having to curb my use?", and "Why hasn't anyone done something about that?". Well fortunately for you Mugen have attempted to do something about it. Question is, just how good is it?
In our third installment of the pursuit for the perfect case, we've stumbled upon the Case-Mate Pop! The design is unique, featuring a one-piece hybrid style enclosure that tightly slips on your device and offers a snug fit. The hard plastic backing is used for reinforcement of the silicone and to provide rigidity, while the silicone aids with grip and shock protection. Although relatively thick, the case still feels comfortable to hold and you'll be provided with a great level of scratch, bump and drop protection.
So you checked out my review on the Incipio Silicrylic and thought it was a little too large for your needs? Not to worry! The SGP Ultra Capsule should float your boat. SGP makes some of my favorite screenshields, which I use exclusively on my phones, tablets and even my MacBook Pro! They've since ventured into the case manufacturing market and the Ultra Capsule series is one of their slim and sleek designs.
Made of TPU, a soft and flexible plastic, the Ultra Capsule shows off its look using a shiny, glossy coating with subtle glitter on the surface. The ports and cutouts are superb, even going as far as to mimic the look of the device by adding the phone's slot to remove the back cover. Although you won't get much protection out of this one, it is a stylish alternative to some of the bulkier cases on the market and at $16.99 it's priced competitively.
The pursuit of the perfect case continues for my Galaxy Nexus and I as today we take a look at the Silicrylic case from Incipio. I've long been a fan of the Silicrylic case, having used it on previous devices. The case design is largely unchanged from the products I used in the past, simply adjusted to accomodate the specifications of the Galaxy Nexus.
A two-piece, hybrid style case, the Silicrylic looks to offer a good level of protection whilst maintaining a thin profile on your device. The hard polycarbonate plastic spine feels flimsy, but once combined with the silicone interior, forms a solid, brick-like feel. Available in 4 models, the case is quite stylish with the contrasting color patterns - most importantly, the plastic is soft touch, which repels fingerprints and adds a slight grip.
Below you'll find the full video review of the case;
On my previous SGP screenshield review, the Ultra Oleophobic, several viewers complained about the lack of screen coverage of the protector - due in part to the curved glass display on your beloved Galaxy Nexus. Since the Ultra Oleophobic is a Dry-apply screen protector, any sort of curvature would cause bubbling, so SGP was confined to keep the screenshield coverage on flatter areas of the display.
For those users that weren't fans of the exposed glass, the SGP Flex is the screenshield for you. This is an ultra clear, wet-apply screenshield made to offer maximum protection and coverage on your display. The packaging comes with 2 protector, a squeegee, microfiber cloth and the install solution.
Below I've posted a video showcasing both the installation and a review of the protector;
A lot of people think it isn't necessary to use a screen protector on a device with either Corning or 'fortified' glass, as we find on the Galaxy Nexus. These materials aren't scratch proof, they are more scratch resistant, but not scratch proof. For this reason I take the precaution of always installing a screen protector.
The folks over at SGP were kind enough to send out a couple of new products for the Samsung Galaxy Nexus, and I'll be taking a look at their Ultra Oleophobic screenshield first. I've used this screenshield countless times in the past and have been nothing short of pleased. It maintains great screen clarity and feel, while adding a coating of oil repellence.
Below you'll find a quick video showing how I install these screen protectors and some added thoughts about the product:
With my recent acquisition of the Samsung Galaxy Nexus, I'm eager to start reviewing cases and accessories for the device here on the AndroidNZ site, unfortunately these products take time to make so I'm left waiting as manufacturers slowly release their products to the market. I did however manage to get my hands on the Diztronic (formerly known as TPU-cases) Matte Black TPU case for my beloved Nexus.
Surprisingly enough, these cases were actually released previous to the device, which at first made me hesitant to try them out. The fit and finish on these is spectacular though, they fit snug on your device and the soft touch backing is both comfortable and clean looking. As a TPU case, you'll receive an average level of protection from bumps, drops and scratches - which is more than enough for the average user.
The cutouts on the case are precise and spot-on, the exception being the volume rocker cover which seems to be offset, causing some issues when pressing down on the button. Apart from that, the case looks great with the smooth black backing and the glossy front lip that matches the screen.
Earlier today Barnes & Noble announced a sequel to the Nook Color, the Nook Tablet.
Obviously intended to compete with Amazon's Kindle Fire, the Nook Tablet appears to have quite a lot going for it and really only loses out to the Kindle Fire on price. The announcement included a release date of 18 November 2011; just 3 days after the Kindle Fire is released.
Unfortunately there is no word on when this is coming to New Zealand, if at all (much like the Kindle Fire in that regard).
Here's a quick run down of the specs in comparison:
Earlier today in New York, HTC announced the imminent release of the HTC Rezound handset. Previously known as the HTC Vigor; the HTC Rezound comes with Beats Audio, a promising 4.3" 720p display (that's 342ppi!) and LTE 4G support in the US.
Unfortunately HTC are still using the outdated Qualcomm MSM 8660 Snapdragon core processor (albeit at 1.5GHz) so I think it's pixel pushing powers may be a little lacking - especially without the hardware acceleration of Android 4.0 ICS. It is also very thick, weighing in at 13.65mm, more than 1.5 times the thickness of a Galaxy SII.
Despite any apparent shortcomings this may turn out to be quite a decent handset with such a high res display.Unfortunately it's going to have to compete with the Samsung Galaxy Nexus which is being released at around the same time.
If you're interested in getting one and live here in little ol' New Zealand you're out of luck; however if you live in the USA then check out Verizon and Best Buy stores from 14th November onwards.
Over at The Verge you can find full coverage including a hands-on and if you're interested in the technical specs, over at GSMArena they have the full list.